Pigment for Slime - Pigment Powder for Slime Uses in 2024

17 Years of Experience in Color Changing Pigment for Slime Solutions - Original Slime Pigments Manufacturer - KingChroma

Home > Pigment Uses > Pigment for Slime

Pigment Powder for Slime

Mica Powder

Thermochromic Powder for Slime

Photochromic Pigments

Pearl Powder

Glow in The Dark Pigment

Chameleon Powder

UV Powder

Reflective Pigment

Pigment for Slime FAQs

I. Application of acrylic pigment in slime

Some acrylic pigments can be added to make slime more colorful. Specific operations are as follows:

  1. Prepare an appropriate amount of slime, and put it into a clean container.
  2. Drop the acrylic pigment into the container. Do not add too much pigment at a time, so as not to affect the quality and taste of slime.
  3. Fully mix the acrylic pigment with slime by hand or with a tool to the desired color.

II. Precautions

  1. Use the high-quality acrylic pigment that complies with safety standards, so as not to affect the health of children.
  2. Do not add too much acrylic pigment to the slime, so as not to affect the texture and taste of slime.
  3. After use, clean the container and tool in time to avoid chemical residues.

To sum up, acrylic pigments can be used for slime coloring. Pay attention to the quality and safety of pigments, as well as the use and precautions.

Step 1: Prepare materials and tools.

Materials: Glue, 1 spoon of baking soda, 2 spoons of brine contact fluid (containing boric acid), mica powder

Tools: Mixing bowl, measuring glass, mixing spoon

Step 2: Mix glue and baking soda.

Pour all glue into the bowl. Add one spoon of baking soda, and fully stir them. Note: Stirring in one direction is preferred.

Step 3: Add mica powder.

The amount depends on the type of powder. In the example, about 3/4 spoon of powder is used for the desired color.

Use 1/2 spoon of powder first. Then slowly it to the desired color.

Step 4: Continue.

Now, add two spoons of contact fluid.

Add the first spoon, and fully stir the mixture. The slime will be thick and bulky. Add the second spoon and fully stir the mixture. The slime will be stuck around the spoon.

  1. Preparation: Prepare the materials as needed, including PVA glue, borax, food colorant (optional), water, etc.
  2. Mixing of glue and borax: Pour an appropriate amount of PVA glue into the container. Then add borax while stirring, until the slime has the ideal viscosity and elasticity.
  3. Adding of pigment (optional): Add an appropriate amount of pigment together while stirring glue and borax, in order to color the crystal slime.
  4. Adjustment of the viscosity: Gradually, add an appropriate amount of water as needed. Adjust the viscosity and softness of slime, while stirring the mixture.
  5. Rubbing and stretching: Take out the crystal slime, and rub and stretch it for better softness and elasticity.

How to use Thermochromic Pigments Correctly?

Thermochromic pigments are state-of-the-art products but structurally weak compared with many other pigments and dyes. To take full advantage of this product while keeping it out

We are Ready to Support Your Pigment for Slime Uses

Scroll to Top